2018 RAM 5500 Official Safety Recalls
Source: National Highway Traffic Safety Administration (NHTSA)
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
Chrysler (FCA US, LLC) is recalling certain 2017-2018 Ram 2500 Pickup, Ram 3500 Pickup, 3500 Cab Chassis, 4500 and 5500 Cab Chassis vehicles. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control (ESC), and traction control systems to fail.
A loss of anti-lock brakes, electronic stability control, or traction control can increase the risk of a crash.
Dealers will replace the brake HCU, or replace the HCU motor, free of charge. Interim notification letters, notifying owners of the safety risk, were mailed January 9, 2025. Some owner notification letters were mailed January 9, 2025. The remaining owner notification letters will be mailed at a future date, anticipated October 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is C4B.
WHEELS:LUGS/NUTS/BOLTS/STUDS
Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
Wheel separation can cause a vehicle crash.
Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
EXTERIOR LIGHTING:BRAKE LIGHTS
Unruh Fire, Inc. (Unruh Fire) is recalling one 2018 Dodge 5500-based fire truck equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.
If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Unruh Fire has notified the owner and will provide replacement brake lights, free of charge. The recall began May 20, 2019. Owners may contact Unruh Fire customer service at 1-800-856-7080.
EXTERIOR LIGHTING:BRAKE LIGHTS
Blanchat Mfg., Inc. (Blanchat) is recalling one 2018 B-27 Minuteman vehicle built on a RAM 5500 chassis and equipped with Whelen brake lights recalled under 18E-063. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.
If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Blanchat has notified the owner, and will replace the brake lights, free of charge. The recall began March 27, 2019. Owners may contact Blanchat customer service at 1-620-896-7145.
ELECTRICAL SYSTEM:SOFTWARE
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Chrysler (FCA US LLC) is recalling certain 2018 RAM 4500 and 5500 cab chassis trucks. The primary and secondary brake hoses located between the brake master cylinder and the hydraulic control unit may have been manufactured without anti-corrosion plating on the ferrules, which can allow the ferrules to corrode.
If the ferrules corrode, the brake fluid may leak and cause a loss of braking, increasing the risk of a crash.
Chrysler will notify owners, and dealers will inspect the brake hoses and replace them if necessary, free of charge. The recall began June 19, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U41.
POWER TRAIN:AUTOMATIC TRANSMISSION
Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.
EQUIPMENT
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.